Cci-thermal-technologies XPA - Explosion-Proof Panel Heater Bedienungsanleitung PDF herunterladen

1.0 SPECIAL NOTICES

1.1 The following special notices highlight important

information in the installation and maintenance

sections. Each serves a special purpose and is

displayed in the format shown:

This symbol indicates a potentially hazardous

situation, which, if not avoided, can result in

personal injury or damage to the equipment.

This symbol indicates a potentially hazardous

situation, which, if not avoided, may be a

shock hazard.

This symbol indicates an imminently hazardous

situation, which, if not avoided, could result in

death or serious injury.

2.0 PRE-INSTALLATION

2.1 Initially, inspect the heater for possible damage

due to shipping and handling. Claims for shipping

damages shall be placed with the carrier.

2.2 Check the heater nameplate to ensure that

the heater area classication and temperature

code are suitable for the hazardous area

classication. For details of hazardous

locations with potential for explosion, refer

to the Canadian Electrical Code or National

Electrical Code.

2.3 Check to ensure that the heater voltage is the

same as the supply voltage.

2.4 The heater must be installed by qualied

personnel in strict compliance with national and

local electrical codes.

WARNING

DO NOT CONNECT THE HEATER TO AN

ELECTRICAL SUPPLY VOLTAGE OTHER THAN

THAT SHOWN ON THE PRODUCT NAMEPLATE.

FIGURE 1 - MODEL XPAL/XPAS CONVECTION HEATER

FIGURE 2 - MODEL XPAL/XPAS CONVECTION HEATER

FIGURE 3 - MODEL XPAR CONVECTION HEATER

TYPE XPA EXPLOSION-PROOF

PANEL HEATER

INSTALLATION, OPERATION &

MAINTENANCE INSTRUCTIONS

E-mail: [email protected] www.ccithermal.com

Date of Issue: March 2014

M11882.Rev.3.00

Printed In Canada

C US

ISO 9001

CAUTION

WARNING

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - PANEL HEATER

11.0 SPECIAL NOTICES1.1 The following special notices highlight important information in the installation and maintenance sections. Each serves a sp

Seite 2 - AND MAINTAIN THE RECOMMENDED

23.0 INSTALLATION - GENERAL REQUIREMENTS3.1 The XPA heater is intended for industrial use and is to be mounted in an enclosure. The main function of

Seite 3 - YES NO NO

3XPAR HeatersStep 1: Scribe a mark into the mounting surface indicating where the top part of the mounting bracket will be located after installation

Seite 4

4HEX BOLTS (INCLUDED)1/4-20UNC x 3/4"LGMOUNTING BRACKET(INCLUDED)SOCKET HEAD CAP SCREWS (INCLUDED)1/4-20UNC x 1/2"LGPROTECTION GRILL(OPTIONA

Seite 5 - XPA CONVECTION HEATER

55.0 WIRING 5.1 Whenever hazardous materials are present, ensure that the junction box covers are secure before energizing the heater. Follow al

Seite 6 - TO DO SO!

69.0 REPAIRS9.1 If the heater malfunctions, and is no longer operating, send the heater to the factory for servicing. Do not attempt to service the

Seite 7

7NOTES

Seite 8

PLEASE ADHERE TO INSTRUCTIONS PUBLISHED IN THIS MANUAL.Failure to do so may be dangerous and may void certain provisions of your warranty. For further

Kommentare zu diesen Handbüchern

Keine Kommentare

Cci-thermal-technologies XPA - Explosion-Proof Panel Heater Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Cci-thermal-technologies XPA - Explosion-Proof Panel Heater herunter. CCI Thermal Technologies XPA - Explosion-Proof Panel Heater User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Cci-thermal-technologies XPA - Explosion-Proof Panel Heater