Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit Bedienungsanleitung PDF herunterladen

Swivel Hanging Mounting Kit Installation Instructions

For Electric Heaters

WARNING:

If the heater is installed on a structure that is to be transported, provide additional support for the

heater during transit. The suspended weight should not exceed 300lbs (136kg).

Refer to the owner’s manual for mounting specications and conditions.

Check that your heater model number corresponds to the model number shown on the mounting kit carton.

Installer required to supply:

a) A method of fastening the Angle Hangers to the supporting structure that is at least as strong

as four 3/8” diameter, grade 5 bolts (see step 1) and,

b) two pieces of 1/2”, schedule 40 or heavier, steel pipe cut to suit required installation length

and threaded at both ends (see step 2).

STEP 1

Fasten Angle Hangers  to a

surface or structure that will

support the heater’s weight using

the installer supplied fasteners.

Refer to the owners’ manual for

the heater’s weight.

Part No. 5751-3

CONTENTS

Item Qty. Description



2 Angle Hanger



2 Connector Hanger



2 Adaptor Hanger



4 Bolt, 1/2 UNC x 1-1/4”



4 Nut, 1/2 UNC



4 Lock Washer, 1/2”



1 Mtg Attach Assy Bracket



1 Swivel Mtg Attach Assy



1 Flat Washer



1 Bolt, 5/8 UNC x 1-1/4”

1 Lock Washer, 5/8”

STEP 2

Screw one Connector

Hanger  and on Adaptor

hanger  onto each steel

pipe until tight (min. 5 turns

each).

STEP 3

Bolt Mtg Attach Assy Bracket 

to the heater using 1/2 UNC x

1-1/4 bolts, lock washers, and

1/2 UNC nuts.

STEP 4

Screw Hanger

Assemblies to the

Swivel Mtg Attach

Assy .

STEP 5

Hang assembly from Angle

Hangers  using two 1/2

UNC x 1-1/4” bolts, lock

washers, and nuts.

STEP 6

Hang assembly from Angle

Hangers using two 1/2 UNC x

1-1/4” bolts, lock washers, and

nuts.

Bolt the Swivel Mtg Attach Assy 

to the Mtg Attach Assy Bracket 

using a 1/2 UNC x 1-1/4” bolt, lock

washer, and at washer. Swivel

heater to desired orientation and

secure in place.

Connector Hanger  must be

hung on the inside of Angle

Hanger  as shown. Rotate

Connector Hanger  to align

with Angle Hanger . Do not

back off more than 3/4 turns.

Mtg Attach Assy Bracket  must be

placed with the threaded hole closest to

the control enclosure side of the heater.

Support structure

Installer supplied

fasteners

4-1/2”

(144mm)

10-1/8”

(258mm)



1/2” Sch. 40 or

heavier Steel pipe















Support structure







Heater

may be

rotated as

indicated

by arrows



For Electric Heaters 1

Inhaltsverzeichnis

Seite 1 - For Electric Heaters

Swivel Hanging Mounting Kit Installation InstructionsFor Electric HeatersWARNING:If the heater is installed on a structure that is to be transported,

Weitere Dokumente für Wasserkocher Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit

Um das Dokument anzuzeigen Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit Bedienungsanleitung

Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit herunter. CCI Thermal Technologies SHMK - Swivel Hanging Mounting Kit User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Wasserkocher Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserkocher Cci-thermal-technologies SHMK - Swivel Hanging Mounting Kit