Cci-thermal-technologies HMK - Hanging Mounting Kit Bedienungsanleitung PDF herunterladen

STEP 4

Hang heater from Angle Hangers 

using two 1/2 UNC x 1-1/4 bolts ,

lock washers, and nuts.

Hanging Mounting Kit Installation Instructions

For Electric Heaters

STEP 3

Insert Hanger Assemblies from

Step 2 through mounting holes and

fasten using lock washers and 1/2

UNC nuts.

STEP 2

Screw one Connector Hanger  and

one Adaptor Hanger  onto each steel

pipe until tight (minimum of 5 turns

each).

Pipe cut length = Distance from

support structure to top of heater LESS

Connector’s length, 4-7/8” (124mm)

STEP 1

Fasten Angle Hangers  to a

surface or structure that will support the

heater’s weight using the installer

supplied fasteners. Refer to the owner’s

manual for the heater’s weight.

Installer required to supply:

a) a method of fastening the Angle Hangers  to the supporting structure. Four 3/8” diameter, grade 5 bolts are

suggested, however, any method providing the same or greater strength may be used.

b) two pieces of 1/2”, schedule 40 or heavier, steel pipe cut to suit required installation length and threaded at

both ends.

Check that your heater model number corresponds to the model number shown on the mounting kit carton.

WARNING:

If the heater is installed on a structure that is to be transported, provide additional support for

the heater during transit. The suspended weight should not exceed 600lbs (272 kg). Refer to

the owner`s manual for mounting specifications and conditions.

Connector Hanger  must be hung

on the inside of Angle Hanger  as

shown. Rotate Connector Hanger 

to align with Angle Hanger . Do not

back off more than 3/4 turns.



Support Structure







Support

Structure

Installer supplied

fasteners

DIM A = Distance between mounting holes.

(Refer to owner’s manual)

4-1/2”

(114mm)







DIM A



1/2” Sch. 40, or heavier

Steel Pipe

CONTENTS

Item Qty. Description

 2 Angle Hanger

 2 Connector

Hanger

 2 Adapter Hanger

 2 Bolt, 1/2 UNC x 1-1/4

 4 Nut, 1/2 UNC

 4 Lock Washer, 1/2”

 2 Bolt, 1/2 UNC x 1-1/4 1

Inhaltsverzeichnis

Seite 1 -  2 Bolt, 1/2 UNC x 1-1/4

STEP 4Hang heater from Angle Hangers  using two 1/2 UNC x 1-1/4 bolts , lock washers, and nuts.Hanging Mounting Kit Installation InstructionsFor Ele

Weitere Dokumente für Wasserkocher Cci-thermal-technologies HMK - Hanging Mounting Kit

Um das Dokument anzuzeigen Cci-thermal-technologies HMK - Hanging Mounting Kit Bedienungsanleitung

Cci-thermal-technologies HMK - Hanging Mounting Kit Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Cci-thermal-technologies HMK - Hanging Mounting Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Cci-thermal-technologies HMK - Hanging Mounting Kit herunter. CCI Thermal Technologies HMK - Hanging Mounting Kit User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Wasserkocher Cci-thermal-technologies HMK - Hanging Mounting Kit

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wasserkocher Cci-thermal-technologies HMK - Hanging Mounting Kit